Product name: Tape maker 4pc
Colour: green(6mm), yellow(12mm), red(18mm), blue(25mm)
Packing: blister card
Instructions for use
Making fabric strips.
1.According to the width you need, cut a strip of parallel cloth at a 45 degree angle
2. Turn the tape maker upside down, insert the strip through the wide opening and use the tip of the awl to pull the strip out from the front of the tape maker.
3、Fix the front end of the pulled out cloth strip on the ironing board with a positioning pin, while pulling the tape maker, make the iron close to the front end of the tape loom, so that the pulled out cloth strip will be ironed into shape immediately.
Tips
For 6mm tape maker, you need to prepare diagonal cut fabric strips of about 12mm width, and for 12mm tape maker with 3mm wrapped edge (wrapped edge strips folded in half), you need to prepare diagonal cut fabric strips of about 24mm width, and for 18mm tape maker with 6mm wrapped edge (wrapped edge strips folded in half), you need to prepare diagonal cut fabric strips of about 36mm width, and for 25mm tape maker with 9mm wrapped edge ( wrapped edge strips folded in half), you need to prepare diagonal cut fabric strips of about 48mm width. For the tape maker, it is necessary to prepare a diagonally cut strip of fabric with a width of approximately 48mm, and a 12.5mm hemmed edge (hemmed strip folded in half) for the artwork.
1. The actual colour may be slightly different from the picture
2. Due to manual measurement, the size may have 1-2 cm difference
Reviews
There are no reviews yet.